供应干混砂浆站，混凝土搅拌站，臂架泵车，输送泵,输送车。

产品类别：混凝土机械 > 拖式混凝土泵

产品规格：HBTS80-16ER,HBTS80-16ERI

产品信息：液压管路选用高性能无缝钢管，精良的焊接工艺确保管路无渗漏现象，所有的高压软管均采用美国Parker或Aeroquip产品。并采用了独特的扣管技术，确保无爆管、无渗油现象。

 

主要特点
Main Feature:
液压系统 Hydraulic system:
◎ 采用全新的开式液压系统及专有的液压缓冲技术，使得系统换向冲击小，发热少。同时选用世界原装重载液压主泵及液压阀，主泵排量大，液压阀通径大，从而确保砼泵的安全与可靠性。
◎ 液压回路采用独特的全程三级高低压过滤系统，同时采用自动加油及旁路自循环系统，在方便加油的同时，对新油进行精过滤，防止人为污染。从而确保油泵、阀组、马达、油缸的低故障与高可靠性。
◎ 独特的油箱设计及风、水冷却系统，确保在高温环境中连续工作，油温不超过75℃。
◎ 液压管路选用高性能无缝钢管，精良的焊接工艺确保管路无渗漏现象，所有的高压软管均采用美国Parker或Aeroquip产品。并采用了独特的扣管技术，确保无爆管、无渗油现象。
◎ 高压管路的连接处采用新型的法兰式连接，具有耐冲击、强度高、无渗漏、安全、易拆装等特点。
◎ 大容量高压蓄能器的采用，及其良好缓冲性能设计，使得摆动系统强劲有力。摆动力矩是同类型号的两倍以上。大大降低了S管阀对砼介质的要求，对施工中的垫层砼同样泵送自如。
◎ 整机润滑系统采用自动润滑，运行可靠。独特的砼缸自润滑设计，确保砼缸与活塞的低磨损与长寿命。
◎ It adopts an entirely new open-hydraulic system and proprietary hydraulic buffer technology resulting in the small impact and low fever of system commutation. Meanwhile, it uses the world`s top-class original overload hydraulic pump with a high displacement and hydraulic valve with a big size so as to ensure the safety and reliability of the pump.
◎ The hydraulic circuit adopts the unique high-low pressure filtration system and meanwhile exclusively uses the automatic refueling and bypass circulatory system. This is not only convenient for refueling but also prevents man-made pollution by filtering the new oil so as to ensure the low fault and high reliability of the pump, valve block, motors and fuel tanks.
◎ The unique design of fuel tank and the cooling system of wind and water can ensure the continuous work in the high-temperature environment. The oil temperature does not exceed 75℃
◎ The hydraulic piping selects the seamless steel tube with high-performance and excellent welding technology to ensure non-leakage of the pipe. All the high-pressure hoses adopt the products of American Parker or Aeropuip. Besides, it adopts the unique technology to ensure non-explosion and non-leakage.
◎ The joint of the high-pressure pipeline adopts the new flange linkage which boasts of many good characteristics such as impact-resistance, high strength, no leakage, security and accessibility of assembling.
◎ The adoption of high-pressure accumulator with large-capacity together with its good buffer performance design makes the swing system even more powerful. The swing moment is more than two times of the similar models. This greatly reduces the S valve`s requirements of the medium concrete and also pumps the cushion concrete smoothly in the construction.
◎ The lubrication system of the machine lubricates automatically and operates reliably. The unique lubrication design of concrete cylinder can ensure the low wearing and long life of the concrete cylinder and piston.

泵送系统Pumping system:
◎ 料斗采用世界新型的锥形结构设计，提高砼的流动性与定盈系数，大大提高砼缸对砼的吸入效率，不仅提高泵送效率，而且降低了造成间接堵管的可能性。
◎ S管曲线优化设计，使砼在S管内流动性好，压力损失 小，同时S管采用耐磨钢制造，内膛底部堆焊耐磨合金层，从而实现S管的长寿命。
◎ 料口端的两级变径设计，可限度的将砼的变径压力释放在输送管内，减少S的压力损失与出口处的压力集中，极大的提高了S管出口的耐磨寿命。同时，采用了变径管与出口的法兰式连接，有效降低了泵送冲击、颤动现象，消除了卡箍式连接带来的安全隐患。
◎ 大扭矩的搅拌系统不仅扭矩大，而且便于拆装的搅拌轴设计，极大地方便了客户的维修搅拌叶片采用耐磨合金三面堆焊工艺，确保其高寿命。
◎ 关键件采用西门子（SIEMENS）元件，强弱电基于一体，不干扰，采用模块化设计，体积小，确保电控系统工作可靠。
◎ 系统中的每一个动作均设有手动按钮，便于整机维修，更换系统内零件。操作系统采用近控、远控与人工控制三种操作方式，不仅方便现场施工，而且在任何两种方式同时出现故障的情况下仍能正常泵送。同时，设有急停开关，以防止不测情况发生。
◎ 控制元件采用西门子LOGO，接近开关损坏时也能工作。
◎ 整个电器箱表面采用喷塑工艺，美观易清理。
◎ The hopper adopts the design of the world`s latest cone-shaped construction to enhance the mobility of the concrete and surplus factor. It can highly increase the inhalation efficiency of concrete to concrete cylinder. This not only improves the pumping efficiency but also lowers the possibility of indirect blocking.
◎ The optimal design of S-tube curve enables the concrete to flow smoothly inside S-tube with low pressure loss. Meanwhile, the wear-resistant steel construction of S-tube with wear-resistant alloys at the bottom of internal chamber ensures the long life of S-tube.
◎ The two-stage adjustable design of the charging hole can release the adjustable pressure of concrete in the pipeline to a maximum degree and therefore reduce the pressure loss of S-tube and pressure concentration of the outlet and highly increase the durability of S-tube`s outlet. Meanwhile, the flange connection of adjustable tube and its outlet can effectively reduce the impact and vibrating of pumping and therefore remove the hidden safety danger of hoop linkage.
◎ The great torque of mixing system and the stirring shaft`s design of easy disassembly and assembly greatly facilitate clients` maintenance. The stirring blades adopt the overlaying technology of wear-resistant alloys so as to ensure its long life expectancy.
◎ The key components use the Siemens components. The strong and weak electricity are integrated without any interference. The modular design and small size can ensure the reliability of electronic control system.
◎ Each activity in the system is equipped with a manual button which is convenient for the machine`s maintenance and replacement of the components. The operation system adopts three operational methods such as short-range control, long-distance control and manual control, which not only facilitates on-the-spot construction but also ensures the normal pumping when any two methods break down. Besides, the exigency stop switch can prevent accidents.
◎ The control component uses the Siemens LOGO which can still work when the switch is nearly damaged.
◎ The entire surface of the electrical boxes adopts spray technology which is attractive in appearance and easy to clean.

主要技术参数 Main Technical Parameters: