供应denoh柴油电焊机HW450DS发电机(组)

电王HW450DS柴油双把发电电焊机参数

           焊接输出（下降特性）

额定功率 KW                   12.38 

额定电流 DCA                  360

额定电压 DCV                   34.4

空载电压 DCV                   80 

额定使用率 %                    50 

电流调节范围(单把) A         60-400 

电流调节范围(双把) A         30-200 

额定转速 rpm                     3,000 

类 型                                   直流整流 

适用焊条 φmm                   2.0～6.0

              焊接输出（平特性） 

额定功率 (KW)                     -/9.6 

电压调节 (V)                        -/18-35

额定使用率 (%)                    -/80 

额定电流 (A)                        -/320 

                   辅助电源

额定输出 KVA                       15 

额定电压 V                            380

额定电流 A                            21.7

功率因数 %                           80

频 率 Hz                               50

额定速度 rpm/min               3600

激励方式                               无 刷

驱动方式                               直接耦合

                     发动机

名称                                      久保田D1105

形式                                      4冲程4缸

排气量 l                                 1.123

额定输出 KW                         21.7

额定转速 rpm                        3600

启动方式                                电起动

燃料                                       轻柴油

冷却方式                                水冷

                       其他

油箱容量 l                              37

尺寸 mm                        1530×710×865

净重 Kg                                 510

电王发电电焊机HW450DS日本久保田KUBOTA柴油双把水冷静音400A纤维素下向氩弧引擎电焊机

DIESEL ENGINE-DRIVEN DC WELDER/AC GENERATOR

One Unit ENGINE DRIVEN WELDERS HW450DS for All Your Welding Needs!

Engine Driven Welders incorporate a gasoline, diesel, or propane fueled engine coupled to an electrical generator to produce power for Stick, TIG, MIG and Flux-Cored welding. Engine driven welders are typically transported on a truck or trailer and are primarily used outdoors. The electricity generated by an engine driven welder powers fans, pumps, air compressors or other electrical tools commonly found on jobsites. During power outages, an engine driven welder can also be used as a backup generator.

450A DC Arc Welding Power Source

HW450DS can perform high-quality welding on pipelines and other welding methods.（Types of welding: Stick, Tig, Mig, Flux-cored, Gouging, etc.）

High-Capacity High-Performance Generator

The unit can also be used as a 15kVA/50Hz high-capacity generator. With a voltage regulation of within ±1.5%. High-quality AC power can be used while welding is being performed.

Low Fuel Consumption and Long Life

The unit incorporate high-output diesel engine featuring low fuel consumption. Operation at low speed is easy on the engine, facilitating especially long life.

Special Design Facilitates Use in Virtually Any Location

The unit has been designed to operate in virtually all locations, from very hot to cold climates. It is ideal for high-quality welding and as a dependable source of power.